47
MAINTENANCE
Headlight Adjustment
1. Inspect tire pressures, correct if necessary.
2. Select a level area with low lighting and enough room to place the motorcycle’s
front tire 25 feet from the wall or temporary screen.
3. Measure from the center of the headlight to the floor. Draw a horizontal line on
the wall or screen that equals this measurement.
4. Have someone who is approximately the same weight as the primary rider sit
on the motorcycle.
5. Place
the
motorcycle
upright
with
the
handlebars centered and
turn on the high beam of
the headlight.
6. The top of the light beam
must be even or below the
horizontal line on the wall
or screen.
7. The light beam should
project evenly to the right
and
left
of
the
motorcycle’s center line.
8. If headlight adjustment is necessary, remove the headlight bezel by removing
screw (A). Turn the headlight aiming screws (B) in or out as needed.
9. Reinstall headlight bezel.
7.62 M
(25 feet)
B
A
ProCarManuals.com
