19
4.2 I User alerts
Flashing LED:
Solutions
• Check that the cleaner is correctly connected to the control box.
If necessary, unplug it and reconnect it following the appropriate
procedure.
•
Rotate the brushes to check that nothing is preventing them from
turning correctly (sand, cable, etc.).
•
The tracks are not turning correctly:
Contact the retailer
.
•
Cleaner operating outside the pool. Make sure you start the cleaner
when it is in the water (see § “2.1 I Immersing the cleaner”).
• Check that there are no stones or hair in the impeller.
•
Clean or change the filter if necessary.
If the problem continues contact the retailer:
Recycling
This symbol is required by the European directive DEEE 2012/19/EU (directive on waste electrical and electronic
equipment) and means that your appliance must not be thrown into a normal bin. It will be selectively collected
for the purpose of reuse, recycling or transformation. If it contains any substances that may be harmful to the
environment, these will be eliminated or neutralised. Contact your retailer for recycling information.
