3.1.1
The Recording Screen
Resolution
Mode
Battery
status
Memory status
Standby
System
date
&
time
Remaining
memory
time
WiFi status
GPS status
3.1.2 LDWS (Lane Department Warning Systems)
When LDWS is enabled after satellite positioning, device will has beep alert
and display an alarm screen if vehicle speed reaches or exceeds 60 km/h and
the vehicle deviates from the original lane.
Exposurebias Value
EN-10
EN-9
3.1.3 FCWS (Front Collision Warning System)
When LDWS is activated and the GPS positioned, a square wireframe with
distance appears on the screen, the device will have beep alert if the vehicle
speed reaches or exceeds 60 km/h and the distance less than 20 meters from
the front vehicle.
With car power adaptor connected the device will automatically turn on and
start recording when the car engine starts. When the engine stops, the device
will automatically save the last file and turn off.
Polaroid
·
E235GW
Polaroid
·
E235GW
25m
3.1.4 A Key Protection
During recording, press
Power
button
to protect current video, the lock
icon appears on the screen, the current movie clip will be protected and
cannot be replaced, the next movie clip will unlock automatically and can be
replaced if the SD card is full.
3.1.5 Motion Detection
First, enter to General Settings to activate Motion Detection function (the
default setting is Off, choose Low / Middle / High to activate the function) ,
enter to Movie Mode setting to set Motion event REC time;
second, setting the Power Off to be Never;
third, press
Down
button to enter motion detection mode on movie mode,
the motion detection icon appears on the screen and start count
backwards 10 seconds, then standby for detection, it will recording
automatically once the device detected any motion in front of lens within 2.5m.
The recording time depends on the Motion event REC time and the default
setting is 10 seconds. The device will start next 10 seconds recording if any
motion detected, press
Down
button can exist from
