background image

Instruction manual | LE5B – Portable Power Supply

5

2. Introduction

Note the following comments when reading the instruction manual: 

• 

The contents of the instruction manual and the information contained here may change without prior 
notice.

• 

The design and technical specifications of the power supply may change, regardless of whether the reason 
for the change is announced or not.

• 

This manual was prepared with care and to the best of our knowledge. Please contact us, should you have 
any questions relating to the product.

• 

This manual may not be copied or duplicated, except for personal use.

Disclaimer

• 

Our company cannot be held liable for damages caused by fire, earthquake, use by a third party, other 
accidents, intentional misconduct on part of the customer, abuse or other abnormal conditions.

• 

Do not repair any damage to the plug connector (power cord or car starter cable) on your own.

• 

The warranty covers all terms and conditions of the warranty. Contents that are not specified in the  
warranty terms and conditions are beyond our responsibility.

• 

Our company assumes no liability for damages caused by incorrect use or non-compliance with instruction 
manual.

• 

This instruction manual can be found and downloaded as a PDF file at our website:  
www.gbt-international.com. 

• 

Intended use:

 The Polaroid LE5B energy storage unit is intended as a power supply for privately used 

electronic devices with a maximum power consumption of 300W. Our product is not suited for equipment 
that relate to one‘s own personal safety and relies heavily on electricity, such as medical devices, equip-
ment for nuclear facilities, the manufacture of air and spacecraft, etc. We therefore assume no liability for  
accidents involving personal safety, fires or machine failures, which were caused by using our product with  
the aforementioned devices.

Summary of Contents for LE5B





























Reviews: