Polaroid PDC 3030 Digital Camera User Guide
www.polaroid-digital.com
US 42
8 Troubleshooting Problems
The troubleshooting guide is designed to help you. If problems continue,
please contact your local customer support hot-line. See your registration
card for help line contact details.
I receive an error message
when I am installing “PDC
3030 Camera Driver”.
“PDC 3030 Camera Driver”
does not load.
I cannot run the PDC 3030
Camera Driver.
I cannot upload images to
the PC.
Connection
failure
or
the camera is not set to
Capture Mode.
Check all cable connections are
secured or set the camera to
Playback Mode.
Conflict
with
another
camera
driver
capture
device.
If you have any other camera
installed on your computer,
remove the camera and its
driver completely from your
system to avoid conflict with
PDC 3030.
Shut down all other applications
and attempt to reinstall the
driver.
Check the USB controller in
your BIOS if they are activated.
If these do not work, contact
your national customer support
representative.
Symptom
Problem
Solution
I cannot upload the images
from the internal memory
of the PDC 3030 camera
to PC.
The SMC card is inserted
inside the SMC card slot.
The memory card has a higher
priority
than
the
internal
memory for image storage,
image transfer or deletion.
I cannot switch on my
PDC 3030 Camera after
inserting a SMC card.
The SMC card is not inserted
all the way in or card slot
door is not closed properly.
Make sure the SMC card is
inserted all the way in and close
the slot door properly.
I press the shutter button
but no response.
The PDC 3030 camera is
processing data.
Or
The internal memory or
SMC card memory is full.
Wait for this process to
complete.
Or
Delete some images in the
internal memory of
the camera
or SMC.
The camera is set to the
Capture mode.
Set the camera to Playback
mode.
PDC 3030 TL US UM 8M.indd
2/25/04, 11:10 AM
42
