GETTING STARTED
Using USB to Power the Unit
Using the USB jack, connect PDR500 to your computer or AC power source using a USB
cable.*
*
Note:
USB connection does not charge the unit or the batteries. It is only an alternate power
source. Battery powered operation is recommended.
Power ON
•
Press and hold
until the LCD displays as shown here.
Hold (disable control)
•
To disable the controls, press
HOLD
.
•
When a button is pressed while
HOLD
is activated, “On HOLD”
will display.
•
To enable the controls, press
HOLD
again.
•
The unit will power OFF automatically if not used after three
minutes.
Setting the Date and time
1.
Press and hold
until the LCD screen shows “ERASE.”
2.
Repeatedly press
VOL +
or
VOL -
until “CLOCK” is shown on the
LCD screen.
3.
Press to enter the date setting mode.
4.
Default date will appear on the display: 08/08/08.
5.
Press
VOL+
or
VOL-
to increase or decrease the day.
6.
Press
to confirm and
advance to the next setting.
7.
Repeat these steps to the set month and year.
8.
Default time will appear on the display: 12:00.
9.
Press
VOL+
or
VOL-
to increase or decrease the hour.
10.
Press
to confirm and
advance to the next setting.
11.
Repeat this step to the set minutes.
12.
Press and hold or press to exit menu mode.
