EN-13
GETTING STARTED
Preparation
1. Attach the camera’s hand strap as shown in the
illustration.
2. Open the battery/SD card door.
3. Insert the battery in the correct orientation as shown
in the illustration.
4. Insert an SD/SDHC memory card (Optional).
The camera has 16MB internal memory (4MB
available for image storage), but you can load an
SD/SDHC memory card (We recommend the use of
a Polaroid SD card - purchased separately - up to
4GB) to expand the camera’s memory capacity.
Be sure to format the memory card with this
camera before its initial usage.
5. Close the battery/SD card door and make sure it is
locked securely.
To prevent valuable data from being accidentally erased from
an SD/SDHC memory card, you can slide the write protect tab
(on the side of the SD/SDHC memory card) to “LOCK”.
To save, edit, or erase data on an SD/SDHC memory card,
you must unlock the card
.
To prevent damaging of an SD/SDHC memory card, be sure
to turn off the power when inserting or removing the SD/
SDHC memory card. If inserting or removing the SD/SDHC
memory card with the power on, the camera will automatically turn off.
Summary of Contents for PoGo CZA-05300B
Page 1: ......