EN-16
Initial Settings
Setting the Date and Time
The date/time needs to be set when:
The camera is turned on for the first time.
The camera is turned on after leaving the camera without the battery for an
extended period of time.
When the date and time information is not displayed on the LCD display, follow these
steps to set the correct date and time.
1. Toggle the
button to [
].
2. Press the
button.
3. Select [Setup] with the
f
button.
4. Select [Date/Time] with the
c
/
d
buttons, and
press the
OK
button.
5. Select the date format with the
c
/
d
buttons,
and press the
OK
button.
6. Select the time format with the
c
/
d
buttons,
and press the
OK
button.
Select the appropriate field with the
e
/
f
buttons and adjust the value for the date and
time with the
c
/
d
buttons.
When your settings are correct, press the
OK
button.
7. To exit from the [Setup] menu, press the
button.
P
Summary of Contents for PoGo CZA-05300B
Page 1: ......
