Talko User Manual v1.2 rev2
www.polaxis.be
4.2 Sound jack & pot
CV signal in allows to choose the word, phrase or allophone to be generated.
Any change on the Sound entry reset the counter in bank N°8 and start a new transmission in
Bank 9.
4.3 Gate jack
A high level high start the complete sound in Speech mode. (regardless of its length)
If the mode switch is on Repeat , the gate will start the sound and repeat it as long as the gate
level stays high.
If the mode switch is on VCO, the gate will start a tone and hold it as long as the gate level
stays high.
4.4 Bend Switch
If the bend is on, the bend pot … well, distorts the sound.
In VCO mode it affect the master tune and if fully CCW rotated, engage the growling mode.
4.5 Speed jack & pot
Change the speed of the voice. Not used in normal VCO mode. Affects volume in Growling
mode.
4.6 Pitch jack & pot
Change the pitch of the voice and change the noise volume in VCO mode
4.7 Bend jack & pot
Change the amount of bending or the pitch of the tone in VCO mode.
Page 6
