2
3
hinge wireless
Bluetooth
®
Wireless Technology
To use your
Bluetooth
wireless technology device
with the Hinge wireless, you must first pair your
device with your Hinge wireless.
You only have to pair your Hinge wireless with your
Bluetooth
device one time. After that you simply
select the “Polk Hinge” from your device
list to make the connection to your headphones.
Connecting with NFC
Near Field Communitcation gives you the ease
and convenience of simply “touching” your
Bluetooth/NFC compatible device to the left
earcup to pair and connect.
Pair and Connect your
Bluetooth
device with the Hinge wireless
1. Make sure your Bluetooth device
and Hinge wireless are powered on.
2. Activate the Bluetooth function on
your Bluetooth source device.
3. Press and hold the 3-button control for
4 seconds to put the Hinge wireless in
pairing mode. The LED will flash white
as it looks for a device to pair with.
4. Your Hinge wireless will now be displayed
on your source device and available to pair
and/or connect. Select “Polk Hinge” on your
device to initiate the connection process.
5 Play your music from your device!
Using your Headphones
Listen
But first…turn down the volume on your music player before putting on your
headphones. Connect with or plug the headphone cable into the 1/8” (3.5 mm)
stereo jack on your music player.
Important:
Headphones have a left and right orientation. They use the markings “L”
and “R” to indicate which earcup goes on which ear. These markings can be found on
the inside of the headband.
Adjusting the Hinge wireless headband
For optimum performance and comfort, you want your headphones to fit snugly
and create a comfortable yet effective seal on your ears. A proper fit ensures the
best sound as well as some effective noise reduction from outside sources. Working
together, the headband and the pivoting earcups will fit any size head, even yours.
• The headband should sit flat across the top of your head.
• Adjust the built-in headband slider as necessary
• The pivoting headphone earcups should fit on your ears and you should feel an
even snugness all the way around and against your ears. This indicates a good fit,
which means outside sounds should be muffled.
Charging your headphones
Use the Micro USB port to charge your headphone’s battery. Charging should take no
longer than 2 hours. A fully charged battery should provide up to 12 hours of listening.
When fully charged, the LED will be green.
Built-in microphones
A chat microphone and a noise cancellation microphone are built into the right
earcup. These microphones use Digital Signal Processing to optimize voice clarity.
LED Status
LED
Description
Flashes white
Bluetooth
pairing mode
Solid white
Bluetooth
connected, battery charge good
Pulses amber
Headphones charging
Solid green
Headphones fully charged
Solid amber
Battery charge low
touch NFC
enabled
device here.
2
3
hinge wireless
Bluetooth
®
Wireless Technology
To use your
Bluetooth
wireless technology device
with the Hinge wireless, you must first pair your
device with your Hinge wireless.
You only have to pair your Hinge wireless with your
Bluetooth
device one time. After that you simply
select the “Polk Hinge” from your device
list to make the connection to your headphones.
Connecting with NFC
Near Field Communitcation gives you the ease
and convenience of simply “touching” your
Bluetooth/NFC compatible device to the left
earcup to pair and connect.
Pair and Connect your
Bluetooth
device with the Hinge wireless
1. Make sure your Bluetooth device
and Hinge wireless are powered on.
2. Activate the Bluetooth function on
your Bluetooth source device.
3. Press and hold the 3-button control for
4 seconds to put the Hinge wireless in
pairing mode. The LED will flash white
as it looks for a device to pair with.
4. Your Hinge wireless will now be displayed
on your source device and available to pair
and/or connect. Select “Polk Hinge” on your
device to initiate the connection process.
5 Play your music from your device!
Using your Headphones
Listen
But first…turn down the volume on your music player before putting on your
headphones. Connect with or plug the headphone cable into the 1/8” (3.5 mm)
stereo jack on your music player.
Important:
Headphones have a left and right orientation. They use the markings “L”
and “R” to indicate which earcup goes on which ear. These markings can be found on
the inside of the headband.
Adjusting the Hinge wireless headband
For optimum performance and comfort, you want your headphones to fit snugly
and create a comfortable yet effective seal on your ears. A proper fit ensures the
best sound as well as some effective noise reduction from outside sources. Working
together, the headband and the pivoting earcups will fit any size head, even yours.
• The headband should sit flat across the top of your head.
• Adjust the built-in headband slider as necessary
• The pivoting headphone earcups should fit on your ears and you should feel an
even snugness all the way around and against your ears. This indicates a good fit,
which means outside sounds should be muffled.
Charging your headphones
Use the Micro USB port to charge your headphone’s battery. Charging should take no
longer than 2 hours. A fully charged battery should provide up to 12 hours of listening.
When fully charged, the LED will be green.
Built-in microphones
A chat microphone and a noise cancellation microphone are built into the right
earcup. These microphones use Digital Signal Processing to optimize voice clarity.
LED Status
LED
Description
Flashes white
Bluetooth
pairing mode
Solid white
Bluetooth
connected, battery charge good
Pulses amber
Headphones charging
Solid green
Headphones fully charged
Solid amber
Battery charge low
touch NFC
enabled
device here.
