PA4A
9
BASIC OPERATION
Power On/Off
Press the
POWER
button (4) to turn the unit on/off.
Volume
To increase the volume, rotate the
Encoder Knob
(5) clockwise. To decrease the
volume, rotate the
Encoder Knob
counter-clockwise.
Mute
Press the
Play/Pause
button (3) on the control panel to mute the audio output.
Press
Play/Pause
button again to restore the audio output to the previous level.
Mode
Press the
MODE
button (7) on the control panel to enter mode selection display.
Continue to press the MODE button to page through the available playback
modes. Press the associated soft button for the desired playback mode as
displayed.
Audio Menu
Press the
MENU
button (6) on the control panel to access the audio menu. You
can navigate through the audio menu items by rotation the
Encoder Knob
and
pressing the
Encoder Knob
to make selection. Rotate the
Encoder Knob
clockwise to increase and counter-clockwise to decrease. The unit will
automatically exit the audio menu after 10 seconds of inactivity. The following
menu items can be adjusted.
Bass Level
Use the
Encoder Knob
to adjust the Bass level range from “-6” to “+6”.
Treble Level
Use the
Encoder Knob
to adjust the Treble level range from “-6” to “+6”.
Balance
Use the
Encoder Knob
to adjust the Balance between the left and right speakers
from “L12” (full left) to “R12” (full right).
Fader
Use the
Encoder Knob
to adjust the Fader between the rear and front speakers
from “R12” (full rear) to “F12” (full front).
Equalizer
Press the
EQ
soft
button to turn on the equalization function and select between
five pre-defined bass and treble curves: USER > FLAT > ROCK > CLASSICAL >
POP.
Loudness
Press the
LOUD
soft
button to toggle loudness on/off. When listening to music at
low volumes, this feature will boost the bass and treble ranges.
