• Do not overload sockets with adaptors and/or transformers.
Only connect the product to a single socket with current that
is compatible with the plug supplied.
• Electrical extension leads that are unsuitable for the power
rating or which are not compliant with law may overheat and
possibly lead to short-circuiting, fire, power outage or
damage to the equipment. Only use extension leads which
are certified, suitable for the power rating, supporting 16A
and earthed.
• To remove the plug from the socket, do not pull the power
cable, but hold the plug itself to avoid damage to the plug
and the cable.
• Always unplug the appliance if it is not in use and before any
preparation, maintenance or cleaning operation.
• Fully unwind the cable before plugging it into the mains and
before use. Always use the product with the cord completely
unwound.
• Do not pull, jerk or strain (twist, crush, iron, cut) the cord.
Keep the cord away from hot and/or sharp surfaces and
elements. Do not allow the cord to touch the hot plate. Avoid
crushing the cord in doors and windows. Do not pull the cord
tight around corners. Avoid treading on the cord. Do not pass
over the cord with the appliance. Do not wind the power cord
around the appliance, especially if the appliance is hot.
• Do not change the plug on the power cable.
• If the cord is damaged, it must be replaced by the
manufacturer, the manufacturer's service technician or a
similarly qualified person to prevent hazards. Do not use the
product if the cord is damaged.
• Do not touch or use the appliance barefoot and/or with wet
body or feet.
• Do not use the appliance near containers full of water, e.g.
sinks, baths and swimming pools.
• Do not immerse the appliance, including the power cable and
plug, in water or other liquids.
• Steam must not be directed towards equipment containing
electric or electronic components.
E
N
G
L
IS
H
| 20 |
