suction
function
to
begin
vacuuming
immediately, removing dirt thanks to the
concentrated steam jet.
12. CLEANING FURNITURE AND
DELICATE SURFACES
12.1 Connect the suction lance (M) or the
nozzle for frames (G) to the handle (A) and
press the suction button on the appliance.
12.2 Turn on the boiler and adjust the
strength
of
the
steam
following
the
instructions provided in point 4.2.
Press and hold the steam trigger on the
handle (34) and direct the jet onto a cloth.
12.3 Use the cloth previously steamed to
clean the surface, avoiding prolonged use on
the same spot.
13. OTHER GENERAL USES
13.1
BRIGHTENING
UP
CURTAINS
AND
DRAPES
Mites and dust can be removed from curtains
and drapes by steaming the fabric with just
the handle. The steam is able to remove
odours and brighten up colours, allowing the
fabric to be washed less frequently.
For this surface, set the steam to level 1.
13.2 REMOVING STAINS FROM CARPETS
AND UPHOLSTERY
Connect the concentrator accessory (D)
without the bristly round brush; direct the
steam directly onto the stain with the
greatest angle possible (never vertically to
the surface to be cleaned) and place a cloth
beyond the stain to collect the dirt that has
been “blown” away by the steam pressure.
For this surface, set the steam to level 1.
Connect the suction lance (M) to the
concentrator accessory (D) and activate
suction to begin vacuuming the dirt removed
which has remained on the floor.
13.3
TAKING
CARE
OF
PLANTS
AND
HUMIDIFYING ROOMS
To take care of your house plants, remove
the dust from the leaves using just the
handle, vacuuming the surface: adjust the
steam to level 1 and vacuum at a distance of
50 cm. Plants breathe better and will be
cleaner and brighter. Furthermore, you can
also use the steam to refresh spaces,
especially those frequented by smokers.
14. ECO PROGRAMME - P0
only for Model FAV80
The Eco function is specifically for cleaning
floors. Thanks to the ECO function, Polti
Vaporetto Lecoaspira automatically sets the
pressure of the steam and suction to achieve
significant energy savings and at the same
time provide optimal performance for the
cleaning of all floors.
To activate the ECO Programme select
programme P0 , as indicated in Section 3. For
steam cleaning and suction of floors, please
refer to the table “Use of frames for floors” of
Section 4.
15. TURBO STEAM PROGRAMME
This
programme
automatically
sets
the
pressure of the steam at maximum power,
ideal for stubborn dirt.
To activate the Turbo Steam Programme
select Programme P7 for model
, P5 for
the model
, as indicated in Section 3.
16. TURBO SUCTION PROGRAMME -
P8
only for Model FAV80
This programme automatically sets the Polti
Vaporetto Lecoaspira at maximum suction
power.
This
programme
allows
you
to
vacuum up dust and liquids or efficiently
remove animal hair. To activate the Turbo
Suction Programme select programme P8, as
indicated in Section 3.
17. IRON PROGRAMME (optional)
(only functions with Polti iron accessory
connected)
Make sure that you have prepared the
appliance following the instructions provided
in Section 1.
WARNING: Do not direct the steam jet direc-
tly onto surfaces.
Before cleaning the surface, always do a test
on a hidden part and see how it reacts to the
application of steam.
WARNING: Before cleaning the surface,
always do a test on a hidden part and see
how it reacts to the application of steam.
WARNING: Steam.
Risk of scalding!
The different coloured brushes allow for a
different
colour
for
each
surface
or
environment.
FAV80
FAV70
After 10 minutes of use, the programme re-
turns to manual.
E
N
G
L
IS
H
| 41 |
LECOASPIRA FAV70_80 - W1ES - M0S12126 - 1V01_FEV 1000-950.qxd 25/01/2021 15:52 Pagina 41