VAPORETTO SV300
18
the cloth attached) on the special frame (
12
)
so that it can slide on the surface (Fig. 9).
NOTE:
the steam ready light (
9
) turns on and off
during use. This indicates that the electric resi-
stance is operating to keep temperature con-
stant and is therefore quite normal.
Warning:
- To remove the cloth from the brush, detach
the power supply plug from the electric
socket and wait a few minutes to allow the
cloth to cool.
NO WATER
The water level is always visible thanks to the
transparent tank.
When the water inside the tank (
D
) has been
used up, steam will stop being released.
To restart operations just fill the water tank (
5
)
again as described in the paragraph “PREPA-
RATION”.
Warning: This must always be done after ha-
ving disconnected the appliance from the
mains.
LIMESCALE FILTER
By nature, water contains mineral salts that fa-
vour the formation of scale.
Vaporetto SV300 is supplied with a limescale fil-
ter (
7
) which reduces the passage of mineral
salts and therefore the formation of limescale.
Always use demineralised water.
We recommend that the filter be changed 2 ti-
mes per year.
To replace the filter, proceed as follows:
• Unplug from the mains electricity.
• Remove the water tank (
5
) (Fig. 3) pulling it
upward, then remove the filter (
7
), still pulling
upward (Fig. 13).
• Position the new filter (
7
), push gently and
make sure that it is perfectly inserted (Fig.
13), then reposition the water tank (Fig. 6).
Inside the package there is a spare filter (
7
), in
addition to the one already mounted on the
appliance.
Note:
The limescale filters, as well as replace-
ment cloths, can be purchased in all leading
household appliance stores, or online at
www.polti.com.
STORING THE DEVICE
Before replacing the appliance:
- Unplug the power supply from the mains.
- Completely empty the water tank (
5
) to avoid
water leaks.
- Before detaching the cloth from the brush,
wait a few minutes to allow it to cool.
- Wind the power cable around the special
cable rewinds (
3
) and (
6
).
Warning:
- Before using the appliance again, remem-
ber to unwind the power cable completely.
The upper cable winder (3) rotates 180° in
order to wind up the power cable quickly.
- Do not keep the appliance connected to
the power supply with the cable wound up.
PRACTICAL ADVICE FOR THE USE OF
THE ACCESSORIES
PRECAUTIONS
• Before treating leather, special fabrics and
wood surfaces, consult the manufacturer’s
instructions and always carry out a test on a
hidden part or on a sample of the material.
Allow the steamed part to dry to make sure
that no changes in colour or deformations
have occurred.
• Please pay careful attention when cleaning
treated wood or terracotta flooring, as prolon-
ged use of steam may damage the wax, poli-
sh or colour of the surfaces to be cleaned. We
therefore recommend only steaming these
surfaces for short periods of time, or cleaning
using a previously steamed cloth.
• The universal cloth (
11
) can be used on most
surfaces. If when using the universal cloth
(
11
), it does not slide smoothly, you can use
the very smooth cloth (
14
).
ENGLI
SH
VT SV300 - M0S10993 - 1U06 - _ver7:FEV 1000-950.qxd
08/07/2014
11.14
Pagina 18
