MA3013 3” Waterproof Speaker
Installation Guide
P
p
4mm holes on
Ø 3 ¼ (83mm) Circle
+
-
1 ½” (38mm)
Installed Depth
3 ½ (90mm)
Overall Diameter
520 McCormick Drive, Suite F, Glen Burnie, MD 21061 Phone: 410 761-4000 Fax: 410 761-6274
www.polyplanar.com
3” (74mm)
Hole Cut Out
Description:
The MA3013 is a 3” Flush mount
speaker especially useful where mounting space
is limited. This compact speaker is designed to be
used alone or conjunction with the MS series
Subwoofer systems.
Installation: Find a suitable location making sure
there is clearance for the installed depth. Use a
hole s
aw or other suitable device to make a 3”
(74mm) cutout.
Place the speaker in the cutout and mark and
drill
⅛” (3mm) holes for the mounting screws
(Supplied). If the panel is too thin or soft for
screws use the stainless screw clips in the
hardware kit.
Attach speaker wires with the positive to the larger
tab as shown on the diagram or use the speaker
wires supplied.
Cutout and use as template for drilling
Specifications:
MA3013
Impedance:
4 Ohms
Max Power:
40 Watts
Continuous Power
20 Watts
Weight
.5 lb/.2kg
Scale = 1:1
Note:
Faxing or reproducing can change scale
Connection Lug Detail: A
Pos
.= .
205” x .032,” 22-18 AWG
(Example: Amp # 640911-1)
Neg.
= .110” x .032,” 22-18 AWG
(Example: Amp # 640923-1)
A
