▪ Encryption status
▪ Call streams (for your system and the participant)
Depending on the nature of your call, you may also see the transmitted and received
streams of audio, video, and content.
4.
Optional: Select a call stream for additional information.
The following additional details about the stream display:
▪ Stream type
▪ Stream quality
▪ Protocol used
▪ Format (may not display on some mobile devices)
▪ Rate used
▪ Frame rate
▪ Packets lost
▪ Packet loss percentage
▪ Jitter
▪ Error concealment
Check Provisioning Results
To verify your settings are provisioned the way you want, you can see if the configuration parameters
were applied successfully to your system.
Make sure your system is registered with a provisioning service, such as RealPresence Resource
Manager.
Procedure
1.
In the system web interface, go to
Servers
>
Provisioning Server
.
2.
Select
Show Results
and verify if parameters applied successfully the last time you provisioned
your system.
The
Result
column displays one of the following statuses:
▪
SUCCESS
: The parameter was applied.
▪
IGNORED
: The parameter didn’t apply because a configuration that controls this feature is
disabled, not applicable, or wasn’t provisioned.
▪
FAILURE
: If you see this, the
Error Message
column can help you identify the issue.
For a list of available system parameters and their permitted values, see the
.
Related Links
Register the System with a Provisioning Service
on page 32
Troubleshooting
130