Test Connection with Another System
With a ping test, you can check if your system can call another system.
Procedure
1.
In the local interface, go to
Menu
>
Settings
>
Diagnostics
.
2.
Go to
Ping
.
3.
Enter the IP address or URL of the system you want to call.
4.
Select
Start
.
If the test is successful, an abbreviated Internet Control Message Protocol (ICMP) message displays. You
see H.323 or SIP information depending on how the far-site system is configured.
Run a Trace Route
You can run a trace route to identify network connectivity issues with your system.
Procedure
1.
In the local interface, go to
Menu
>
Settings
>
Diagnostics
.
2.
Go to
Trace Route
.
3.
Enter the IP address or URL with which to run the trace route.
4.
Select
Start
.
If the test is successful, the hops between your system and the specified destination display.
LDAP Directory Server Ignores the Minimum TLS
Version Setting
Symptom:
You’ve changed your system configuration to use TLS version 1.1 at minimum, but the system still
connects to your LDAP directory server with TLS 1.0.
Workaround:
Restart your system after configuring the
Minimum TLS Version
setting.
Related Links
Register with an LDAP Directory Server
on page 97
on page 63
Troubleshooting
137