![background image](http://html.mh-extra.com/html/poly/g7500/g7500_administrators-manual_1575582019.webp)
Initial system setup is complete. You can start using the system.
Related Links
Access the System Web Interface
Create Local Administrator Credentials
on page 47
on page 30
on page 29
Complete Setup with Provisioning
To finish setting up your system, provision the system’s local administrator password, country, and
timezone.
Make sure to configure your provisioning server (for example, RealPresence Resource Manager) ahead
of time so that it recognizes and works with your endpoint.
Procedure
1.
Power on the system and follow the onscreen instructions.
2.
Log in to the system web interface and go to
Servers
>
Provisioning Server
to register the
system with your provisioning service.
3.
In your provisioning template configuration file, set the following parameters:
See the
Poly VideoOS Parameter Reference Guide
for detailed
descriptions about configuration parameters and their permitted values.
▪
sec.auth.admin.password
▪
device.local.country
▪
device.local.timezone
The provisioning service automatically configures these settings on your system.
Initial system setup is complete. You can start using the system.
Related Links
Register the System with RealPresence Resource Manager Provisioning Service
on page 34
Download a Provisioning Template Configuration File
Managing Peripheral Devices
You can pair, monitor, and unpair the devices connected to your system in the system web interface.
Pairing IP Devices on the Link-Local Network (LLN)
IP devices automatically pair with your system when connected to either of the system’s three link-local
network (LLN) ports.
The Studio X50 and Studio X30 don't support LLN connections.
You can pair the following devices to your G7500 system with an LLN connection:
▪ Poly IP Table Microphone
▪ Poly IP Ceiling Microphone
▪ Poly Microphone IP Adapter
Setting Up the System
18