Configure 3.5 mm Audio Output
If you want to use the 3.5 mm stereo line output to hear audio in the room, make sure you mute the
monitor(s) connected to your system through HDMI.
The Studio X30 doesn’t support 3.5 mm audio output.
Procedure
1.
In the system web interface, go to
Audio/Video
>
Audio
>
Line Out
.
2.
To specify how volume is controlled for a device connected to the line out port, choose one of the
following
Output Mode
options:
▪
Variable
: Enables users to change the volume.
▪
Fixed
: Sets the volume to the audio level configured for the system.
USB Audio
Your system supports audio input and output sources through USB connections. When enabled, non-USB
audio connections aren’t supported.
Using USB and Bluetooth Headsets
You can use USB and Bluetooth headsets with your system (Bluetooth headsets require a USB adapter).
When connected, you can control your headset audio but not the system audio (such as mute or volume
control).
Only headsets with the following specifications are supported:
▪ 48 kHz sample rate
▪ Dual channels
▪ 16-bit pulse-code modulation (PCM)
Using the Shure IntelliMix P300
You can connect a Shure IntelliMix P300 audio conferencing processor to your G7500 or Studio X50
system using a USB-A port (USB-C isn’t supported).
Note the following when using this audio processor:
▪ Once connected to the system, the processor handles all audio.
▪ You can’t use speakers and microphones that aren’t connected to the processor.
▪ The video system automatically disables its internal echo cancellation processing.
Configuring Audio Settings
75