Configuration and Management Interfaces
Polycom, Inc.
12
Procedure
1
Click the
Browse
button in the
Restore Configuration
section of the web page.
2
Select the
Restore
button to start the process.
The device automatically reboots after the restoration is complete.
Reset Configuration Locally
The
Reset Configuration
function resets the device to its factory default condition. Call history and various
statistical information are removed at the same time. Use the device reset with extreme caution as the
operation cannot be undone.
Procedure
1
Click
Reset
on the
Reset Configuration
web page. A confirmation window displays.
2
Click
OK
to confirm. The phone resets its configuration to its factory default condition.
The device automatically reboots after the factory reset process completes.
By default, the hardware reset button located via an opening on the underside of the device resets all
settings. You can change reset behavior via configuration.
Reset Configuration Remotely
You can reset the device configuration to its factory default condition remotely.
Procedure
1
Enter the following parameter into an XML configuration file:
<ParameterList X_Reset="All">
2
In the PDMS-SP interface, use base profiles to push the XML file to the device. You can also go to
Restore Configuration
on the local web page.
All passwords and PINs are excluded from the backup file. Hence they aren’t available to restore.
Call history is excluded from the backup, but can be saved as an XML formatted file separately
from the Call History web page.
Reset Configuration Options
Option
Description
Default Setting
Router Configuration
When checked, click
Reset
to restore all your router
configuration parameters to the factory defaults.
Yes
All Settings
When checked, click
Reset
to restore all configuration
parameters to the factory defaults.
