Parameter Reference Guide
Polycom, Inc.
73
X_SipDebugOption
Enables sending SIP signaling debug information to the
syslog server (if one is configured on the device). Choose
from:
•
Disable
(do not send SIP signaling debug information)
•
Log All Messages
•
Log All Except REGISTER Messages
Disable
X_SipDebugExclusion
A list of SIP methods to exclude from the syslog for this SP
service. For example: notify, subscribe.
X_SatelliteMode
Enables satellite mode on this trunk. In this mode, the user
must explicitly sign on (using * code) to receive phone calls
on this trunk. The SIP REGISTER sent by the device to the
ITSP on this trunk indicates if the user wants to sign on (and
therefore takes over the incoming calls for this account).
This feature is only applicable if the service is provided by an
OBiPLUS system.
No
X_Proxy
Enables proxy mode operation on this SP service. If
enabled, the SP accepts SIP Registration from one client
device from the LAN side, which must be using the same
user-id and password as this SP’s
AuthUserName
and
AuthPassword
parameters for authentication. The client
device, known as the
local_client
, may send SIP INVITE to
the device at this SP to make calls. This SP’s
InboundCallRoute
must be set up with the proper routing
rule to handle calls from the local_client.
The SIP Proxy Server parameter on the local client should
be set to:
<obi-number>.pnn.obihai.com:<sp-user-agent-p
ort>
where
<obi-number>
is the 9-digit OBi number of this
device and
<sp-user-agent-port>
is this SP’s
X_UserAgentPort
parameter.
For example, SP1 has a local_client with the userid
4086578118
and the client wants to make and receive calls
using SP3. The SP1
InboundCallRoute
shall include the
following rule:
{4086578118>:sp3}
The SP3
InboundCallRoute
shall be:
{sp1(408657118@local_client)}
No
SP
n
Services Parameter Guide
Parameter
Description
Default Setting
