Parameter Reference Guide
Polycom, Inc.
86
ToneOnPrimaryServiceDown
Selects the tone to play in place dial tone
when the service corresponding to the
Primary Line is out-of-service. Choose
from:
•
No Tone
•
Normal Dial Tone
•
SIT Tone 1
•
SIT Tone 2
•
SIT Tone 3
•
SIT Tone 4
Normal Dial Tone
Ringer
RingFrequency
Ringer frequency in Hz (14 to 68) to apply
to the Phone port when ringing.
20
RingVoltage
Peak ringer voltage in volts (55 to 82) to
apply to the Phone port when ringing.
70
RingWaveform
Ringer waveform to apply to the Phone
port when ringing. Choose from:
•
Sinusoidal
•
Trapezoidal
Sinusoidal
InterleavedRing
When both Phone ports are ringing,
enabling this option causes the device to
interleave the ring signal applied to each
port to reduce the chance of overloading
the power supply.
No
Port Settings
OnHookTipRingVoltage
Tip/Ring Voltage when the attached phone
is on hook (30 V to 52 V).
46
OffHookCurrentMax
Maximum supported current (15 mA to 45
mA) when the attached phone is off-hook.
20
Phone Port Parameter Guide
Parameter
Description
Default Setting
