Parameter Reference Guide
Polycom, Inc.
91
UseExternalConferenceBridg
e
Enables using an external conference
bridge for conference calls (SIP only). In
addition, the following rule
{cbridge:SPx(bridge-userid)}
must also be added to the Phone port's
OutboundCallRoute
parameter, where
x
=1,2,3,4, and bridge-userid the userid of
the conference bridge SUA. The keyword
cbridge is hard-coded and must not be
changed.
No
ToneProfile
Selects a Tone Profile for call progress
tone generation.Choose from
A
or
B
.
A
LastDialedNumber
Last number dialed out on the Phone port.
LastCallerNumber
Last caller's number that rings the Phone
port.
AcceptMediaLoopback
Enables the device to accept incoming
media loopback calls.
Yes
MediaLoopbackAnswerDelay
Delay in milliseconds before the device
answers an incoming media loopback call.
0
MediaLoopbackMaxDuration
Maximum duration in seconds to allow for
an inbound media loopback call. Set the
value to blank or 0 to make it unlimited.
0
RepeatDialInterval
Interval in seconds between retry in a
repeat dial operation.
30
RepeatDialExpires
Duration of time in seconds when a repeat
dial operation remains active.
1800
GenerateCPCSignal
Controls when the device should generate
a CPC signal when the remote party
hangs up on an established call. Choose
from:
•
Never
•
For Inbound Calls Only
•
For Outbound Calls Only
•
For Inbound and Outbound
Calls
For Inbound and Outbound
Calls
EnablePHONEPortBargeIn
Enables the caller to barge in when he
calls the other Phone port from this Phone
port while the other Phone port has an
active call in progress, on-hold, or ringing.
Yes
Phone Port Parameter Guide
Parameter
Description
Default Setting
