Polycom Kirk 6020-6040 User Guide
Advanced...
62
Polycom, Inc.
Creating a Login
To create a login, the system must allow subscriptions to be made. Some
systems also require an Authentication Code (AC). If more than one system
currently permits subscription, you will need to know the ID of the system to
which you want to subscribe. Authentication Codes and system ID’s will be
provided be the system administrator.
You can subscribe up to 15 systems, that is create 15 logins.
1
Press Menu to enter main menu.
2
Scroll to Settings
and press Select.
3
Scroll to Advanced
and press Select.
4
Scroll to Login and press Select.
5
Scroll to Create login and press Select. The handset will start searching for
a system.
6
Scroll to the found system and press Select.
7
If required, enter an AC Code and press Ok to connect to the system.
8
Press Ok.
Note:
If the handset is already subscribed to 15 systems, you will have to
remove a subscription before creating a new subscription (refer to
“Removing
a Login” on page 61
).
Selecting Login Automatically
When auto login is turned on, the handset automatically change to another
system when necessary. Auto login should only be used when systems are
separate, with no overlaps.
Note:
To activate auto login your handset must be subscribed to at least
two systems.
1
Press Menu to enter main menu.
2
Scroll to Settings
and press Select.
3
Scroll to Advanced
and press Select.
4
Scroll to Login and press Select.
5
Scroll to Auto login and press Select.
6
If Off is selected, press Change to select On.
The handset automatically selects a system. The selected system is
marked with an A.
