Provisioning and Configuration Guide SoundPoint IP 200W
2 - 2
• Firmware Update (or Boot) Server
. HTTP or TFTP server holding binary
firmware images for remote firmware upgrading of the telephones. In
addition the server makes textual release description available for the end
user through the phone’s user interface.
• InfoPush Server
. Consists of a SIP client that can send SIP MESSAGEs
containing compiled Wireless Markup Language (WMLc) decks.
Optionally the InfoPush server can embed a SIP REGISTRAR.
Refer to the
Information Services Developer’s Guide
for information on how
to develop a contetn server.
• InfoBrowse Server
. Stores a possibly dynamic web tree of WMLc decks
containing info-browse information.
These servers can be placed either on the Internet or on a corporate local area
network (LAN). For more information on Polycom’s suggested server
configuration, refer to
Setting Up the Boot Server
on page
3-2
.
Note
The InfoPush Server and InfoBrowse Server are optional and not available at the
default setting.
Note
As the firmware update (or boot) server and the configuration server location are
configured by a common configuration parameter, they must be placed on the
same IP address/DNS. For more information, refer to
Configuration Parameters
on
page
A-2
.
Polycom recommends that you use only the SIP call control servers that have been
advertised as interoperable with SoundPoint IP200W phones. For more
information, go to
http://www.polycom.com/partners/
.
Summary of Contents for SoundPoint IP 200W
Page 4: ...Provisioning and Configuration Guide SoundPoint IP 200W iv ...
Page 10: ...Provisioning and Configuration Guide SoundPoint IP 200W 1 4 ...
Page 32: ...Provisioning and Configuration Guide SoundPoint IP 200W 3 20 ...
Page 62: ...Provisioning and Configuration Guide SoundPoint IP 200W A 16 ...
