2) Press and Hold the Mute button on the Base
until the 2
nd
headset light blinks to get in
Pairing mode.
3) Press and Hold the Mute button on the
Headset (Press the headset volume control
switch vertically) until the headset light will
blink to get in Pairing mode too.
The Headset and the Base will communicate. If success, One Beep tone sounds
and Both Lights will OFF.
TS3.
Is the Headset Button on the Polycom Phone TURNED ON by pressing the
CALL BUTTON on the headset in step
TS2
above?.
If NOT, the JABRA EHS SET on your Phone was not
completed or erased due to Power reset of the Polycom
phone.
For setup it, the followings will help.
