background image

SAVE THESE INSTRUCTIONS

When using your telephone equipment, the following safety precautions should 
always be followed to reduce the risk of fire, electric shock, and injury to people.

•  Read and understand all instructions. 

•  Follow all warnings and instructions marked 

on the equipment.

•  Installation must be performed in accordance 

with all national wiring rules.

•  The outlet to which this equipment is con-

nected must be installed near the equipment, 
and must always be readily accessible.

•  This equipment can be hazardous if im-

mersed in water.  To avoid the possibility of 
electrical shock, do not use this equipment 
while you are in the bathtub or shower, or 
when you are wet.  If you accidentally drop 
the equipment into water, do not retrieve 
it until you have first unplugged all cords.  
Do not reconnect this equipment until it has 
dried thoroughly.

•  Avoid using this equipment during electrical 

storms in your immediate area.  There is a 
remote risk of electric shock from lightning.  
Urgent calls should be brief.  Even though 
protective measures may have been installed 
to limit electrical surges from entering your 
home or business, absolute protection from 
lightning is impossible.

•  If you suspect a natural gas leak, report 

it immediately, but use a telephone 
away from the area in question.  The 
SoundStation2W™’s electrical contacts could 
generate a tiny spark.  While unlikely, it is 

possible that this spark could ignite heavy 
concentrations of gas.

•  Never push objects of any kind into the 

SoundStation2W™ through housing slots as 
they may touch hazardous voltage points or 
short out parts that could result in a risk of 
electric shock.  Never spill liquid of any kind 
on the telephone.  If liquid is spilled, contact 
service personnel.

•  To reduce the risk of electric shock, do not 

disassemble SoundStation2W™.  Opening 
or removing covers may expose you to 
hazardous voltages.  Using incorrectly reas-
sembled equipment can cause electric shock.  
If your telephone equipment does not work 
properly, refer to the section describing how 
to connect service.

•  For technical support contact Polycom Sup-

port at http://esupport.polycom.com.

•  Never install telephone wiring during a 

lightning storm.

•  Never install telephone jacks in wet locations 

unless the jack is specifically designed for 
wet locations.

•  Never touch uninsulated telephone wires or 

terminals unless the telephone line has been 
disconnected from the network interface.

•  Always use caution when installing or 

modifying telephone lines.

IMPORTANT SAFETY 

INSTRUCTIONS

Summary of Contents for SoundStation 2W















































Reviews: