background image

SoundStation2W™ Administrator Guide - 33

Caller ID*

You can turn Caller ID on or off.  By default, Caller ID 
is on.

*Caller ID is a subscription 
service.  Check with your local 
telephone service provider to de-
termine if this service is available 
in your area.

Phone System

1.  Press the Menu button, choose 

Admin Setup and press the Select 
button, enter passcode (if required) 
and press the 

ENTER

 soft key.  

Choose Phone System using the 
Scrolling buttons, and press the 
Select button.

2.  Choose Caller ID using the Scroll-

ing buttons, and press the Select 
button.  Press the 

ON

 or 

OFF

 soft 

key or cycle through the options 
using the Scrolling buttons.

3.  Press the 

SAVE

 soft key or the 

Select button to save your entry.  
You may press the Exit button to 
cancel your entry.

Audible Alerts

You can turn the Low Battery and Signal Strength 
audible alerts on or off.  By default, the Low Battery 
audible alert will be on, but the Signal Strength audible 
alert will be off.

1.  Press the Menu button, choose 

Admin Setup and press the 
Select button, enter passcode (if 
required) and press the 

ENTER 

soft key.  Choose Phone System 
using the Scrolling buttons, and 
press the Select button.

2.  Choose Audible Alerts using 

the Scrolling buttons, and press 
the Select button.  Choose 
either Low Battery or Signal 
Strength using the Scrolling 
buttons, and press the Select 
button.  Press the 

ON 

or 

OFF 

soft 

key or cycle through the options 
using the Scrolling buttons.

3.  Press the 

SAVE 

soft key or the 

Select button to save your entry.  
You may press the Exit button 
to cancel your entry.

Summary of Contents for SoundStation 2W















































Reviews: