SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
104
PN: 1725-36038-001_N.docx
The display would look like the following for the single SSID mode.
1 1 1 1 1 1 - 2 2 3 3 3 4 4 4
1 1 1 1 1 1 - 2 2 3 3 3 4 4 4
1 1 1 1 1 1 - 2 2 3 3 3 4 4 4
1 1 1 1 1 1 - 2 2 3 3 3 4 4 4
A n y D e t l
Where:
•
111111 – the last two octets of the on-air MAC address for a
discovered AP.
•
22 – the signal strength for the specified AP.
•
333 – the channel number of the specified AP.
•
444 – the beacon interval in milliseconds configured on the
specified AP.
•
Any/MyID – softkey to toggle between “single SSID” and “any
SSID” mode.
•
Detl/Smry – softkey to toggle between the multiple AP
(summary) display, and the single (detail) displays for each AP.
The following screen shows how the display would look when there
are three APs configured with an SSID that matches that of the
handset. The first has a signal strength of –28 dBm, is configured on
channel 2, with a beacon interval of 100 ms. The second has a signal
strength of –48 dBm, is configured on channel 6, with a beacon
interval of 200 ms. The third has a signal strength of –56 dBm, is
configured on channel 11 with a beacon interval of 100 ms.
a b 7 b c 8 - 2 8 0 0 2 1 0 0
2 a e 5 7 8 - 4 8 0 0 6 2 0 0
2 a e 5 9 6 - 5 6 0 1 1 1 0 0
A n y D e t l
