SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
14
PN: 1725-36038-001_N.docx
Minimum System Requirements
•
A wireless LAN must be properly configured and operational
through the use of 802.11a/b/g/n wireless APs. Consult the
for the appropriate make/model of
WLAN.
•
To load software and configuration files to the handset over the
air, a provisioning Server (either HTTP or TFTP) must be available
on the network. The current handset software must be installed in
the proper download directory on the provisioning server. If this
server is not found, the handset will boot with the last known
configuration.
•
If SVP is used for QoS, the SVP Server must be installed and
properly configured.
•
Software versions required, if SVP and/or OAI are used:
Component
Version
SpectraLink 8000 SVP Server
17x.034 or higher
OAI Server MOG 600
54.032 or higher
OAI Server MOG 700
82.019 or higher
•
If Wi-Fi Standard QoS is used, then each AP must be configured
for such features as WMM-Power Save; WMM-Admission
Control; proper EDCA parameters; DSCP mapping for voice and
control traffic; call admission control and Proxy ARP. Consult the
•
If WPA2-Enterprise is used, then all portions of the Public Key
Infrastructure (PKI) need to be installed and configured properly
in order acquire the network.
•
An approved SIP call server must be installed and operational on
the LAN. A complete list of approved product can be found on
the Polycom website at
http://support.polycom.com/global/documents/support/user/
products/voice/spectralink_8020_8030_sip_feature_matrix.pdf
