Configure Each SpectraLink Wireless Telephone
PN: 1725-36038-001_N.docx
67
files. If the HTTP server IP or TFTP server IP is configured (not set to
0.0.0.0 or 255.255.255.255) with either Static IP configuration or using
DHCP option 66 for TFTP, or the boot server/next server (siaddr)
field, the handset will check for newer software each time it is
powered on or comes back into range of your network. This check
takes only seconds and ensures that all handsets in your network are
kept up-to-date with the same version of software.
TFTP Server IP
The IP address of a TFTP server on your
network, A TFTP server is not required if the files are on an
HTTP server.
HTTP Server IP address
A single IP address for the HTTP server
on your network. An HTTP server is not required if the files
are on a TFTP server.
HTTP Port
An integer from 0-65535 and will default to 80
HTTP Server Directory Path
A string from 1-127 characters that
identifies the location of the configuration files.
Syslog Server IP
The IP address of the syslog server. See the
Diagnostic Tools
section for more information.
DNS Server IP / DNS Domain
The IP address of the DNS server. The
DNS domain is a string from 1-127 characters.
Time Server IP
The IP address of the time server.
SVP Server IP
The IP address of the SpectraLink 8000 SVP Server. If
using Static IP configuration, this is simply the IP address of the
SpectraLink 8000 SVP Server. Note that the SpectraLink 8000 SVP
Server must be statically configured to have a permanent IP
address. If DHCP is being used, the handset will try the following,
in order: the DHCP option 151, then a DNS lookup of
“SLNKSVP2” if the DHCP options 6 (DNS server) and 15 (Domain
Name) are configured.
The SIP TFTP Server IP address no longer exists. Older versions
of Polycom SIP allowed the user to specify different TFTP servers
for downloading code and downloading configuration files. Version
131.031 and above allow specification of only one TFTP server
address. Both functional code and configuration files are
downloaded from the same location.
OAI Server IP
The IP address of the SpectraLink 8000 OAI
Gateway. If using Static IP configuration, this is simply the IP
address of the SpectraLink 8000 OAI Gateway. If DHCP is being
used, the handset will try the DHCP option 152.
