Configure Each SpectraLink Wireless Telephone
PN: 1725-36038-001_N.docx
69
WPA2-PSK
The security features of WPA2 (Wi-Fi Protected Access)
using PSK are available and may be used if supported by the APs in
the facility. Select either
Passphrase
and enter a passphrase between
eight and 63 characters in length or
Pre-Shared Key
and enter the 256-
bit key code.
WPA-PSK
The security features of WPA (Wi-Fi Protected Access)
using PSK (pre-shared key) are available and may be used if
supported by the APs in the facility. Select either
Passphrase
and enter
a passphrase between eight and 63 characters in length or
Pre-Shared
Key
and enter the 256-bit key code.
Cisco FSR
(Fast Secure Roaming) FSR is designed to minimize call
interruptions for SpectraLink 8020/8030 Wireless Telephone users as
they roam throughout a facility. Cisco FSR requires specific
configuration of the Cisco APs in your site. See your Cisco
representative for detailed documentation on configuring the APs
and other required security services on the wired network. To
configure Cisco FSR on a handset, you must enter a Radius Server
username and password into each handset.
Username
Enter a username that matches an entry on the RADIUS server.
Usernames are alphanumeric strings, and can be entered using the
alphanumeric string entry technique.
Password
Enter the password that corresponds to this Username.
WPA2-Enterprise
The
Authentication
setting can select either
*EAP-FAST
or
PEAP
as the
authentication method for RADIUS server. See the
System
Components
section for tested models.
Fast Handoff
allows the use of either *
CCKM
or
OKC
. These
mechanisms allow a phone to quickly and securely roam between
APs with a minimum disruption of audio.
Username
:
Enter a username that matches an entry on your
RADIUS server. Alphanumeric strings can be entered using the
alphanumeric string entry technique.
Password
:
Enter the password that corresponds to this username.
The
Delete [PAC/Cert.]
:
option removes expired credentials from the
phone. When the authentication method is EAP-FAST the PAC on
the phone is deleted. If the RADIUS server has enabled
“anonymous in-band PAC provisioning ”, then the phone will
automatically re-acquire these credentials from the RADIUS
