SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP
40
PN: 1725-36038-001-H.doc
on the phone is deleted. If the RADIUS server has enabled
“anonymous in-band PAC provisioning”, then the phone will
automatically re-acquire these credentials from the RADIUS
server over the air. When the authentication method is PEAP or
EAP-FAST manual provisioning, the credential on the phone is
deleted and a new one needs to be downloaded through the HAT.
See additional details in
WPA2 Enterprise PEAP Certificate
Enrollment and EAP-FAST Manual
PAC Provisioning
section later in
this chapter.
Custom – QoS
SVP
mode uses the SVP Server to provide enterprise-grade QoS.
DSCP tags
are used to change the priority settings for various
classes of packets as they are transmitted to the network from the
Wireless Telephone. Default values are given but may be
overwritten:
WT in call = 46
,
WT standby = 26
,
Other = 0
.
Wi-Fi Standard QoS
mode uses standards-based traffic controls for QoS,
instead of the SVP Server.
DSCP tags
are used to change the priority settings for various
classes of packets as they are transmitted to the network from the
Wireless Telephone. Default values are given but may be
overwritten:
Voice = 46
,
Control = 26,
Other = 0
.
Admission Cntrl
is used to enable and disable the use of WMM
Admission Control by the handset for the AC_VO and AC_VI
access categories. If the WLAN is using WMM Admission
Control, the handset should be set to
*Mandatory
. If the WLAN is
not using WMM Admission Control, the handset should be set to
*Optional
. See the
Best Practices Guide for Deploying SpectraLink
8020/8030 Wireless Telephones
for a detailed explanation of the use
of WMM Admission Control.
CCX
CCX settings configure the handset for operation as a CCX V4
certified client.
WPA2-Enterprise
The
Authentication
setting can select either
*EAP-FAST
or
PEAP
as the
authentication method for RADIUS server such as those from
Cisco, Microsoft, or Juniper.
Note that for
Fast Handoff
, the only selection available is *
CCKM
.
