SpectraLink Wireless Telephone Configuration
PN: 1725-36038-001-H.doc
41
Username
:
Enter a username that matches an entry on your
RADIUS server. Alphanumeric strings can be entered using the
alphanumeric string entry technique.
Password
:
Enter the password that corresponds to this username.
The
Delete [PAC/Cert.]
:
Option removes expired credentials from
the phone. When the authentication method is EAP-FAST the
PAC on the phone is deleted. If the RADIUS server has enabled
“anonymous in-band PAC provisioning”, then the phone will
automatically re-acquire these credentials from the RADIUS
server over the air. When the authentication method is PEAP or
EAP-FAST manual provisioning, the credential on the phone is
deleted and a new one needs to be downloaded through the HAT.
See additional details in
WPA2 Enterprise PEAP Certificate
Enrollment and EAP-FAST Manual
PAC Provisioning
section later in
this chapter.
QoS
–
DSCP
tags
are used to change the priority settings for various
classes of packets as they are transmitted to the network from the
Wireless Telephone. Default values are given but may be overwritten:
Voice
=
46
,
Control
=
26
, O
t
her =
0
.
Regulatory Domain/802.11 Config/Transmit Power
Regulatory domain, 802.11 configuration and transmit power are
interdependent. See
Appendix A: Regulatory Domains
for regulatory
domain setting specifications. Polycom recommends that you check
with local authorities for the latest status of national regulations for
both 2.4 and 5 GHz wireless LANs. A regulatory domain must be
selected in order for the handset to operate. There is no default
setting.
FCC requirements dictate that the menu for changing the regulatory
domain be available by password, which in our case is the
LINE
key.
Press
LINE
and then navigate to the desired domain. Press
NavOK
to set
the domain.
01
- North America
02
– Europe
03
– Japan
04
– Singapore
05
– Korea
06
– Taiwan
07
– Hong Kong
