Camera Setting
Description
Brightness
Use the slider to adjust image brightness.
Contrast
Use the slider to adjust image contrast.
Saturation
Use the slider to adjust color saturation.
Sharpness
Use the slider to adjust video sharpness.
White Balance
Specifies how the camera compensates for
variations in room light sources.
Select
Auto
or adjust the value manually. If you
adjust manually, select a color temperature value.
The color temperature values, measured in
degrees Kelvin, correspond to the color of the
ambient light in a room.
Gain
Use the slider to adjust the signal amplification from
the camera.
Backlight Comp
Enables or disables backlight compensation.
PowerLine Frequency (Anti Flicker)
Change the number to prevent flicker in the video.
5.
Do one of the following:
▪ (Windows) Select
Apply
to save the changes or
Default
to restore the default settings.
▪ (Mac) Select
Save
to save the changes or
Reset
to restore the default settings.
6.
(Only for Windows) Select
Camera Control
to control the camera:
Settings
Description
Zoom
Adjust camera zoom in or out.
Exposure
Set the exposure number.
Pan
Adjust the left or right direction of the camera.
Tilt
Adjust the up or down direction of the camera.
7.
Select
OK
.
Pair the Studio USB Device to a Bluetooth Device
Connect the Poly Studio USB device to a Bluetooth device and use it as the speaker and microphone of
the device.
You can pair the Poly Studio USB device with a mobile phone, a computer or laptop, or a tablet.
Note:
The Poly Studio USB device doesn’t support mixed types of audio and video input. If you connect
it to a computer over USB and Bluetooth at the same time, make sure that your application uses
both audio and video input from Studio USB device over USB.
Managing the Studio USB Device
12
