Managing the EagleEye Cube USB
Device
Topics:
▪
Initialize the EagleEye Cube USB Device Using the Setup Wizard
▪
View EagleEye Cube Information
▪
Update the EagleEye Cube Firmware
▪
▪
▪
You can use Polycom Companion to show basic information, update the firmware, and configure the user
and admin settings for the EagleEye Cube USB device.
Initialize the EagleEye Cube USB Device Using the
Setup Wizard
When you start up the Poly EagleEye Cube USB device for the first time, or after you factory reset the
system, the setup wizard leads you through the minimum configuration steps.
Procedure
1.
Connect the EagleEye Cube USB device to your computer, then select the Poly EagleEye Cube
tile in Polycom Companion.
2.
Enter the admin password in the
Password
field (the default password is
Polycom12#$
).
3.
Accept the
End User License Agreement
, and select
Sign In
.
4.
Change the default password using one of the following options:
▪ Select the
Simple Password
check box to enter a simple password.
▪ Enter a password that adheres to the on-screen requirements.
5.
Select
Confirm
.
6.
Select your country, then select
Next
.
7.
Optional: Select
Skip
to keep the current device name, or change the device name in the input
field under
Device Name
.
8.
Optional: Select
Skip
to ignore the network settings, or configure a network to connect to the
EagleEye Cube USB device.
9.
Optional: Select
Skip
to ignore provisioning server settings, or select
Provisioning Mode
and
choose one of the following options:
▪
Disable
: No provisioning
▪
Manual
: Configure the following parameters:
26
