background image

PolyCom EX User Manual 

Aug. 18, 2004      v 1.1 

 

 

                 Page 7 of 13 

 

To ensure that the unit has been connected properly to the 
network, a green “up arrow” for each network connection will 
appear on the screen. 

 

 

 

Note:   If any of the network connections have not been made, a red “down arrow” will 

appear. Once all network connections have been made, the network information will 
disappear from the screen and the system will be ready for use.  

 

PLACING A VIDEO CALL  

The NORTH Network technical team will enter the IP addresses for all NORTH Network 
sites into your Address Book when your site is being set up. They will also be responsible 
for keeping your Address Book up to date and updates as necessary. 
 

Placing a Call from the Address Book 

 

1) Access the 

Address Book

 on the 

Main Menu

, by using the red 

DIRECTIONAL

 

buttons to highlight the 

Address Book

 icon and press the

 SELECT

 button. The 

Address Book

 screen appears.  

Note: Alternatively, you can press the 

DIRECTORY

 button on the remote control, 

and that will bring you right to the address screen.   

 

 

 

 

 

2)  Place the call by scrolling to the site you want to call in the 

Address Book

 screen 

and press the green 

CALL/HANG-UP

 button on the remote control. 

3)  The far site will appear on your monitor within 75 seconds. 

 
As the system tries to make a connection, both the near and far sites hear the systems ring. 
The ring is similar to that of a telephone. A green lottery ball in the bottom left hand corner of 
the screen will confirm the connection. 
 

Address 

Book 

Speed 

Dial 

Copyright © NORTH Network 1998.

The information herein may be reproduced provided that it is accurate and NORTH Network is credited as the source.

Summary of Contents for The Remote Control














Reviews: