Example
Description Status Message
S01GAINIA10
Set gain on
input A to
10 dB.
S01GAINIA10
S01GAINIA?
Query the
gain on
input A.
F01GAINI2xB01GAINITxS01GAINIAxQ01GAINIAxT01GAINITx
,
where
x
is a number between 0 and 30, depending on the current
setting of the gain on input channel A.
S01GAINI*6
Set gain on
all inputs (1,
A, B, T) to 6
dB.
S01GAINI*èèèè
S01GAINI*ìääì
Set gain on
input
channels A
and B to 0
dB and gain
on input
channels 1
and T to 9
dB.
S01GAINI*ìääì
S01GAINI*?
Query gain
on all inputs
(1, A, B, T) .
S01GAINI*abcd
, where
a
-
d
are each between
ä
and
ÿ
, depending
on the current setting of the gains for each of the four input
channels.
8.59.
GAINO
-- Set Output Gain
This command sets or queries the gain (in dB) of the four output channels (1, A, B, T) .
This command is a channel integer command. See
Section 6.3
and
Section 6.2
for more information
on this type of command. The minimum and maximum values for this command are -100 and 20,
respectively.
This command is saved to non-volatile memory only as part of a preset. The state of this command
will be restored after power-up only if a preset is saved and that preset is set to be the power-on
preset.
Example
Description
Status Message
S01GAINOA10
Set gain on output channel A to
10 dB.
S01GAINOA10
S01GAINOA?
Query the gain on output channel
A .
, ,
S01GAINOAx
where
x
is a number between
-100 and 20, depending on the current setting
of the gain on output channel A .
S01GAINO*6
Set the gain on all output
channels (1, A, B, T) to 6 dB.
S01GAINO*èèèè
