5.Attach Brackets to the Scanner Rail
Attach the mounts onto both sides of the scanner. Tighten the screws until they are firm, but do
not overtighten. Adjust the distance between the cameras by loosening the bracket screws as
needed.
6.Attach the Lenses to the Cameras
Carefully remove the lenses from the packaging and take off the camera lens cap from each
camera. The lenses will need to be screwed onto the cameras until they are tight.
7.Connect the USB 3.0 Cables to the Cameras
Attach the USB 3.0 cables to the back of the cameras.
