Scanner Type
HDI Compact L6
HDI Compact S1
680
220
Clearance Distance(mm)
FIRST SCAN
QUICK START GUIDE
2
TAKING YOUR FIRST 3D SCAN
Determine the clearance distance between your scanner and your target
object using the table below.
Place the object to be scanned at approximately the same clearance distance
away from the 3D scanner. This ensures that the cameras will be focused to
get the most amount of data out of a scan.
·
·
Navigate to the
Project
tab in FlexScan3D and you should be able to see the
object in the live feed of the camera window on the bottom right of the screen.
·
Figure 2
: Adjust the scanner and the tripod in such a way that the scanner is at a 45-degree
angle looking down on the object.