Go to the
Project
tab in FlexScan3D and you will see the object in the live feed camera window
on the bottom right of the screen.
By default, the scanner brightness slider will be at the value of 1 and the gain at 0. If you require
more gain so that you can get better results while scanning dark-colored objects the gain value
could be increased using the slider.
The scanner has two buttons
SCAN
and
PAUSE
. You can hit the scan button to start scanning.
Point the scanner on the surface of the object to be scanned and move around its surface area
while keeping the laser dots coinciding with each other. The laser dots are a reference that the
object is in focus with the cameras and would result in the most amount of data out of a scan. It
is important to keep this distance to get the best results.
