OWNER’S MANUAL
17
Should you encounter any problems, contact Customer Service at (888) 919-0070 from 8 AM to 5 PM Mon. thru Fri.
MST. Extended operating days and hours during peak season requirements.
5. To lock the Pump Base , apply the latch pin by turning to the right.
Step 3.
BOTTOM VIEW OF PUMP AND CANISTER
Close Up
Make sure that the notch and groove are aligned.
TOP VIEW OF PUMP AND CANISTER
17
The water outlet on Canister
and the Rubber Nozzle on
the pump should be aligned.
19
19
3. Once the
P
ump is inserted into the
C
anister , please make
sure the arrow with the indentation is pointing to the matching indentation on the
canister
and make sure that the Rubber Nozzle is aligned with the water Outlet on the Canister.
There is a groove on the pump that needs to be aligned
with the
notch on the canister (visible from bottom only). Please make sure that the pump is correctly aligned, if it is not aligned correctly the Pump Base
can still
lock in place but may leak.
17
4. Once the
P
ump is properly aligned, be sure the Gasket is properly in place. Then slide the Pump Base up to the base of the canister and
carefully tighten the Pump Base onto the threads by turning clockwise. Make sure the pump base is not cross threaded. Cross threading can cause
leaking out of the bottom of the canister.
19
17
15
17
19
15
Step 4.
Step 5.
Summary of Contents for SUMMER WAVES RX1000
Page 20: ......
