- 4 /18 -
MI01 Rev. 06 dated 08/11/2019
This document is the property of PolyKeg S.r.l. - Unauthorised copying and use is prohibited
USER MANUAL FOR
POLYKEG KEGS
2. WARNINGS AND RULES FOR SAFETY
The PolyKeg
®
one-way keg is for professional use. Before use, consult this manual, the warning label and
instructions carefully (Fig. 1) as well as the symbols (Fig. 2) on the keg.
If you are inexperienced in the use of the PolyKeg
®
keg or tapping systems, contact your suppliers in order to
organise appropriate training. The tapping system must be fitted with a suitable pressure reducer complete
with a safety valve in order to not exceed the maximum operating pressure indicated on the label.
The incorrect use of the PolyKeg
®
keg and/or tapping system may damage the keg or lead it to burst, causing
harm to persons and/or things. The one-way PolyKeg
®
keg cannot be re-used, must not be incorrectly
disposed of and must be delivered empty and depressurised to an authorised collection centre.
Check the integrity of the keg before and during use.
Do not remove or render illegible the labels on the keg.
Keep away from
children.
Do not perforate
and/or cut.
Do not roll and/or
allow to fall.
Do not expose to
sunlight.
Do not remove
or tamper with
the valve.
Keep away from
corrosive/chemical
substances.
Do not use detergents.
HAZARD CO2 AND N2
Read the instructions regarding
the use of CO2 and N2 available
from your suppliers.
Suffocation hazard.
KEG TEMPERATURE
0°C < T < 35°C (32°F < T < 95°F)
WORKING PRESSURE
Max 3.5 bar (50 psi)
If over-pressurised, the keg may cause harm
to persons and/or things.
Fig. 1
Fig. 2
