TREE ASSEMBLY INSTRUCTIONS
*Electrical Rating For The Tree
(For Indoor Use Only)
1.36A 120V, 60Hz
Top view
Side view
Fig. C
ASSEMBLY INSTRUCTIONS
MADE IN CHINA
MODEL #: M-P60036,M-P60037,M-PCD031969,M-PCD042301,M-P101230
Insert and slide the legs
upward into the slots of the
base until firmly secured.
Fig. A - Tree Stand Assembly
Fig.B - Tree and Light Assembly
Section 1
Section 2
Section 3
Assemble
Red Labels
Together
Assemble
Yellow Labels
Together
Congratulations on purchasing your new tree from
Polytree
®
! Carefully follow the instructions below
on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (Fig.A)
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section and insert it into the
assembled stand. Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the middle section(s) into the bottom section until the tree top is inserted.
6. Allow branches to fall into place or gently pull up and out.When adjusting branches, be sure that all
wires are free of branch hinges.
7. (For pre-lit trees only) Connect the light strings as per the color labels indicated in Fig. B and insert
green label plug into the wall outlet. Your entire tree should now be lit. If some bulbs do not light or
flickers, search for any loose plugs and/or broken, loose or missing bulbs. Replace bulbs promptly in
order to maintain the performance and life expectancy of your pre-lit tree.
8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from
the pole and fan out one to the right, one to the left and one at the center of the main stem. (Fig. C)
9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform
look. Shift branches to fill any gaps.Your Christmas tree is now complete and ready to be decorated.
Insert
Green Label
Plug Into Wall
Outlet
