background image

ASSEMBL

Y INSTR

UCTIONS

MADE IN CHINA

9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform
     look. Shift branches to fill any gaps.Your Christmas tree is now complete and ready to be decorated.

STORAGE INSTRUCTIONS

TROUBLE SHOOTING TIPS

SPARE PARTS

1. Remove all ornaments and decorations. For pre-lit trees, first unplug extension cord from the wall outlet 

and then disconnect light extension cord between each section of the tree.

2. Disassemble the tree from the top to the bottom. Start with the tree top and gently lift straight up to 

remove from section below and fold all branches toward the pole.

3. In case of difficulty separating the tree pole (trunk), apply a small amount of lubricant at the joint and 

rotate the upper pole in both directions. Lift up the upper pole again.

4. Continue by gently lifting straight up each section(s) from the section below and fold all branches 

toward the pole until the bottom section is removed from the tree stand.

5. Carefully place all tree sections into shipping box and tape it shut.
6. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to 

excessive heat or humidity may damage your tree.

For Pre-lit Trees, If The Tree Does Not Illuminate
1. Please check to make sure that all plugs are properly connected according to the color labels indicated 

in Fig.B and the power cord is plugged into the wall outlet. Refer to assembly guide for instructions. (If 
the tree comes with a foot pedal, try stepping on the on/off button).

2. Please check for blown fuses at the light string plugs and power cord plug. Replace as needed.
    Note: Please make sure to use appropriate replacement fuses as indicated on the light string plug and
    power cord plug.
3. Please check for loose, broken or missing light bulbs and replace as needed.

For pre-lit trees spare bulbs and fuses are included, if extra parts are needed, please contact our customer 

service center.

CUSTOMER SERVICE FOR CHRISTMAS TREES

For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase. Please contact 
us at 1-888-919-0070 or visit our website at www.polygroup.com. One of our customer service 
representatives will be happy to assist you.

TREE ID# IS LOCATED ON END PANEL OF BOX. TREE ID# IS REQUIRED WHEN REQUESTING REPLACEMENT PARTS.

Customer Name:                                                                  

Address:(No P.O. Boxes)                                                     

City & State:                                                                           

Zip Code:                                                                                

Day Phone:                                                                            

Date Purchased:                                                                   

Tree ID#:                                                                       

Tree UPC#:                                                                    

Store Purchased:                                                       

Specify Problem:                                                       

                                                                                       

                                                                                       

Press the selector button on the “Dual Color Light Controller” or
“Remote Controller” to select among: (1) CLEAR AND

MULTI-COLOR ALTERNATING; (2) CLEAR LIGHTS; (3) MULTI

LIGHTS and (4) TURN OFF BOTH LIGHTS.
For the remote controller, replace only with CR2032 battery.
See bottom of the remote controller for replacement instruction.

WARNING

1. Use only power adaptor supplied with this product, using a different adaptor will damage the lights.
    and cause fire, electrical shock hazards.
2. FOR INDOOR USE ONLY.

HOW TO USE THE DUAL COLOR LIGHT CONTROLLER AND

REMOTE CONTROL:  

Light

Controller

Selector

Button

Remote

Controller

Reviews: