6.
Save config
Select Yes or No
7.
Loading config
7.1
Load saved settings
Select Yes or No.
7.2
Load default
Select Yes or No.
8. Version
Software and Hardware Version
Attention: The output parameters have to set after a reset, to the default values
from the user manual.
Programing via web browser (NMS)
Connect PC or laptop, via standard network cable, with the NMS-socket.
If you use a Proxy server, please deactivate them in the network settings.
The PC has to be in the same network like the HDM 1 device. Default IP address of the device is
192.168.001.226. The PC needs in this case the IP address: 192.168.001.xxx. Not allowed is 0, 255
or already used ip addresses. This settings can be done in Windows -> Network connections ->
Lan-connection.
IP address to enter the web browser:
http://192.168.001.226
Username: admin
Password: admin
