22
Factory settings
The input signals are defined as H.264 signals. The modulator outputs are all
active.
The delivery status can be established at any time by "Factory set". All
transport stream information is given neutral and can be adapted to the re-
quirements of the cable network operator.
The basic settings of the device are shown below:
HDM 1 SL
Input 1
Video Format
Aspect Ratio
Low delay
Video Bit Rate (Mbps)
H.264 Profile
H.264 Level
Audio Format
Audio Bit Rate
Audio Gain (0-400%)
MPEG-4 AVC/H.264
Auto
300 ms
8
High Profile
Level 4.0
Mpeg 2
192 kbps
100%
Modulator
Modulation Mode
Symbol rate
FEC DVB-S
FEC DVB-S2
Pilot DVB-S2
Roll off
IF Frequency
RF Output level
DVB-S
27500 kSps
7/8
1/2
Off (Aus)
0.35
950 MHz
-16 dBm