27
3. Modulate Setting
3.x
Output:
Selection: A, B
3.x.1
Bandwidth:
Selection: 6 MHz, 7 MHz, 8 MHz
Default: 8 MHz
3.x.2
Constellation:
Selection: QPSK, 16 QAM, 64 QAM
Default: 64 QAM
3.x.3 FFT:
Selection: 2K, 8K
Default: 2K
3.x.4
Guard Interval:
Selection: 1/4, 1/8, 1/16, 1/32
Default: 1/32
3.x.5
Code Rate:
Selection: 1/2, 2/3, 3/4, 5/6, 7/8
Default: 5/6
3.x.6
RF Frequency:
Range: 30-960 MHz
Default: 474/482 MHz
3.x.7
RF out level:
Level range -30 dBm up to -10 dBm
-30 dBm = 79 dBµV
-25 dBm = 84 dBµV
-20 dBm = 89 dBµV
-15 dBm = 94 dBµV
-10 dBm = 99 dBµV
3.x.8
RF On
:
Selection: On or Off
Default: On
3.x.7
ASI Output:
Selection: A, B, C (E)
4. TS config
Adjust TSID and ONID for two outputs and ASI output
3.1 Output A
3.2 Output B
3.x.1 Bandwidth
3.x.2 Constellation
3.x.5 Code Rate
3.x.6 RF Frequency
3.x.9 ASI Output
3.x.3 FFT
3.x.4 Guard Interval
ode Rate
3.x.7 RF out level
3.x.8 RF On
