26
Attention
This module contains ESD components! (ESD = Electrostatic Sensitive Device).
An electrostatic discharge is an electrical current pulse, which can flow through an electrically insulated material, when triggered by a large volt-
age difference. To ensure the reliability of ESD components, it is necessary to consider their most important handling rules:
» Pay attention permanently to potential equalisation (equipotential bonding)!
» Use wrist straps and approved footwear for personnel grounding!
» Avoid electrostatically chargeable materials such as normal PE, PVC, polystyrene!
» Avoid electrostatic fields >100 V/cm!
» Use only labeled and defined packing and transportation materials!
Damage caused by faulty connections and/or improper handling are excluded from any liability.
Recycling
All of our packaging materials (packaging, identification sheets, plastic foil and bags) are fully recyclable. The relevant disposal instructions are
listed below. The devices are to be disposed of properly according to the current disposal regulations of your district/country/state as electronic
scrap.
In compliance with the following requirements:
EU
WEEE Directive (2012/19/EU)
WEEE-Reg.-Nr. DE 51035844
Italy
Direttiva RAEE (2012/19/UE)
Raccolta carta
Raccolta plastica
Guarantee conditions
The general terms and conditions of Polytron-Vertrieb GmbH apply. The general terms and conditions can be found on our website at:
https://polytron.de/index.php/en/company/general-terms-and-conditions
§
