41
Bandwidth (only Quickly Config.)
Definition of the channel bandwidth for assigning the output channels
6 MHz, 8 MHz
Standard: 8 MHz
Constellation
Configuration of the constellation of the output signals.
16 QAM, 32 QAM, 64 QAM, 128 QAM, 256 QAM
Standard: 64 QAM
Symbol Rate
Definition of the symbol rate of the output channels
3000…9000 kSps (3 …9 MSps)
Standard: 6875 ksps (6.875 MSps)
Note
The output frequencies are always assigned to the forced adjacent channel in blocks of four. With individual pro-
gramming and activation of the output channels, the last activated channel is always the reference for the frequency
assignment.
Note Level assignment
-20 dBm = 89 dBµV
-5 dBm = 104 dBµV
-15 dBm = 94 dBµV
0 dBm = 108 dBµV
-10 dBm = 99 dBµV
3 dBm = 112 dBµV
Attention
In the menu item
“Modulator“
the output level for all activated channels is displayed.
In the setting menu for the selected modulator the output level is configured for the
respective channel. The overall level at the output is reduced by 3 dB each time the activated output channels are
doubled compared to the individual output level.
Example
Single output level
„Channel 1“
-
„Channel 4“
-6 dBm
Total output level for 1 activated output channel
-6 dBm
Total output level for 2 activated output channel
-3 dBm
Total output level for 3 activated output channel
-1.2 dBm
Total output level for 4 activated output channel
0 dBm
8.5 Men
u “TS Config“
In this menu the configuration of the output transport streams will be done.
After clicking on
“
Output TS x
”
the selection list of the TS output channels 1-4 is displayed. By clicking on the desired
TS output channel, it is selected. The button
“Stream Select”
is used to assign the streams to the selected output
transport stream. To activate, please press the button, then the following menu window will open.
The "Input and output range" is set using the control panels in the "Setting range".
CA filter function activate/deactivate (Avoid interference from the encryption function)
PID remapping activate/deactivate
Refresh of program information at input
Refresh of program information at output
Input TS
Output TS
Adjustment area
